Operation Manual

16
Return to contents
To modify the information shown:
l Access the Menu by simply touching S7000 in the centre of the screen.
l Press the ‘Configure’ button.
l Press the icon where you will see the list of options below.
l Select the option you wish to change on the left.
l To change a setting, simply press on the tick box to indicate which option you would like to choose.
l Continue to select each option and select your preference.
l Press ‘OK ’ at the bottom of the screen to save your preferences.
Your chosen settings will now be saved and will appear on the screen each time you use S7000. If you want to switch between
your Current Speed and the Atomic Clock or the Estimated Time of Arrival and Time to Destination during your journey simply
touch the screen where either piece of information is displayed and the unit will display the alternate setting and vice versa.
However each time you power the device up the original setting will be displayed.
2.2
S7000 volume can be adjusted using this function within the
‘Configure’ menu. To adjust the volume:
l Press the centre of the screen to access the ‘Menu’.
l Press ‘Configure’.
l Press the ‘Volume Control’ icon.
l To increase the volume press the icon.
l To decrease the volume press the icon.
l To test the volume before saving, press the ‘Test’ icon.
l To reset the volume to the factory default press the ‘Reset’ icon.
l Press ‘OK’ at the bottom of the screen to save your setting.
Note: The arrow icon in the bottom right hand corner of the display will return you to the ‘Configure’ menu if pressed but will not
store any changes you have made. You need to select the ‘OK’ button in order to save your changes.