Operation Manual

17
Return to contents
3. Planning a route
There are several ways to plan a route on S7000.
3.1
l Press the centre of the screen to access the ‘Navigate to’ menu.
l Press the ‘Find by Post Code’ icon.
l If you have the European version of S7000, you will need to select
the ‘Country’ first BEFORE typing the postcode. (If the correct
country is already displayed, go to the next step). Use the arrow
keys on the right of the display to scroll up and down the country
options. Select the country with your finger.
l Press ‘Post code’ and enter the full postcode using the onscreen keyboard.
l Press the ‘OK’ button on the keyboard.
Please Note: The button on the keyboard with no character on it is the ‘Space’ key. A space between the two parts of the
postcode MUST be entered in order for the postcode to be recognised.
If the following message is displayed ‘Please, input correct
postcode’, the postcode has been entered incorrectly. Press OK and
retype the postcode.
l S7000 will display a screen showing the postcode and the street name.
l If you know the house/property number of your destination, press the ‘House No.’ button to enter it. Once
you have entered the house number press the ‘Ok’ button.
l Alternatively, if you do not have a house or building number, you can navigate to a point where two roads
meet instead. Press the ‘Intersection’ button and select the road.
l Press the ‘Calculate’ button.
Once the calculation is complete you can either press ‘Go’ to start navigation, ‘Simulation’ to see the actual route that will be
taken, ‘Route Option’ to change the parameters of the route or ‘Guide’ which will list the turn by turn instructions of the journey.
The ‘Summary Screen’ will tell you the distance to your destination, estimated time of arrival and the estimated time it will take
to complete your journey.
Please note: The summary screen is only displayed for approximately 10 seconds before the unit automatically begins to
provide you with turn-by-turn instructions.