Operation Manual

23
Return to contents
Once you have pressed ‘Go’ S7000 will now display your current
map position along with a small summary screen located in the
bottom left hand corner. The following information is displayed on
the summary screen:
l Stage 1/4 - indicates this is the first destination of the journey
l Distance to first destination
l Estimated time of arrival to first destination.
l At the bottom of the screen the following information is
displayed
l Total distance of multi-route journey
l Estimated time of arrival at the end of multi-route journey.
If, during the journey, you wish to cancel the current stage and begin travelling to the next stage in your multi-route journey press
the summary screen in the bottom left hand corner of the display and the message ‘Delete current stage?’ will be displayed. Press
‘OK’ and the unit will calculate your route to the next stage in the multi-route from your current position.
Note: If S7000 is turned ‘OFF’ and then ‘ON’ during a multi-route journey the device will retain the current route and ask you if
you wish to continue with the current destination or with the next stage of the destination or to cancel the multi-route.
3.6.4 Auto arrange
Once you create a multi route S7000 can ‘arrange’ the multi route in to a logical order by pressing the icon
Before After
Once the route has been arranged press the icon then press
S7000
will now calculate the
multi routes estimated
time and distances
Press to continue or to display the route on a map
Then displays
the route
summary