Operation Manual

29
Return to contents
3.12 Search by coordinate
To navigate to a location using a co-ordinate enter the Menu by pressing anywhere on the screen. Press the arrow positioned on
the bottom right hand side of the screen once and then press the ‘Find by coordinate’ icon. Next enter the coordinate using the
key pad and press the OK button.
You can enter the coordinate in three different formats. For example.
Decimal Degrees
Latitude (N): 53.462968°
Longitude (W): -2.291367°
Please note when inputting the Longitude you ignore the minus symbol (-)
Degrees, Minutes, Seconds
Latitude (N): 53°27’45.95”N
Longitude (W): 2°17’28.16”W
Please note when inputting the Longitude and Latitude you ignore the letters ‘N’ and ‘W’
Degrees, Decimal Minutes
Latitude (N): 53° 27.766’N
Longitude (W): 2° 17.469’W
Please note when inputting the Longitude and Latitude you ignore the letters ‘N’ and ‘W’.
After pressing OK, the location of the coordinates will be shown on the map. If correct press ‘Quick menu’ and then ‘Continue’ and
follow the on screen instructions to calculate a route.
3.13
S7000 can recalculate your route by avoiding certain roads or redirecting you by distance. This facility only becomes available once
you have calculated a route.
To perform a re-route:
l Press the centre of the screen to enter the ‘Navigate to’ menu.
l Press the black arrow once.
l Press the ‘Re-Route’ icon.
You can then choose how you would like to re-route your journey from the selections shown on the display.
In order to use this function on S7000 you will need to have entered and calculated a route.
If the ‘Re-Route’ icon is greyed out a route has NOT been entered.