Operation Manual

30
Return to contents
3.13.1
If you know the road name or road number you wish to avoid, then select this option.
l Press ‘Avoid by Road Name’.
You will be provided with the turn by turn instructions of the route that you are currently following. If the road you are looking for
is not visible, press the down arrow on the right hand side of the display to see further turn by turn instructions.
l Once you have found the road that you wish to avoid, select it with your finger.
Once the calculation is complete you can either press ‘Go’ to start navigation, ‘Simulation’ to see the actual route that will be
taken, ‘Route Option’ to change the parameters of the route or ‘Guide’ which will list the turn by turn instructions of the journey.
The ‘Summary Screen’ will tell you the distance to your destination, estimated time of arrival and the estimated time it will take
to complete your journey.
Please note: The summary screen is only displayed for approximately 10 seconds before the unit automatically begins to
provide you with turn-by-turn instructions.
3.13.2
If you wish to avoid several roads from the selected route calculated by S7000, then this function allows you to re-calculate a route
over a user defined distance, ranging from 1 mile up to a maximum of 100 miles.
To use this function:
l Press the ‘Avoid by range’ button - the ‘Select avoided range’ page will be displayed.
l Select the distance of the range you wish to avoid using your finger.
If you wish to view more range distances then press the down arrow on the right hand side of the display. Once you have selected
the range you wish to avoid S7000 will automatically re-calculate your route.
Once the calculation is complete you can either press ‘Go’ to start navigation, ‘Simulation’ to see the actual route that will be
taken, ‘Route Option’ to change the parameters of the route or ‘Guide’ which will list the turn by turn instructions of the journey.
The ‘Summary Screen’ will tell you the distance to your destination, estimated time of arrival and the estimated time it will take
to complete your journey.
Please note: The summary screen is only displayed for approximately 10 seconds before the unit automatically begins to
provide you with turn-by-turn instructions.