Operation Manual

31
Return to contents
3.13.3
If you do not wish to use the alternative routes offered by S7000 and you wish to return to the original calculated route, press the
‘Clear Avoided Road’ button and the original route plotted by S7000 will be restored.
Once the re-calculation of the original route is complete the summary screen is displayed. Once the calculation is complete you
can either press ‘Go’ to start navigation, ‘Simulation’ to see the actual route that will be taken, ‘Route Option’ to change the
parameters of the route or ‘Guide’ which will list the turn by turn instructions of the journey. The ‘Summary Screen’ will tell you
the distance to your destination, estimated time of arrival and the estimated time it will take to complete your journey.
Please Note: If you have already travelled some of the re-calculated route, S7000 may produce a slightly different route from
what was originally plotted.
The summary screen is only displayed for approximately 10 seconds before the unit automatically begins to provide you with
turn-by-turn instructions.
If the ‘Avoid by Road’ and ‘Avoid by Range’ have not been used, this feature is unavailable and the button will
be greyed
out.
3.14
After a route has been calculated and the journey has commenced, you can access the summary display again by using this
function.
To view the summary screen:
l Press the centre of the screen to enter the ‘Navigate to’ menu.
l Press the black arrow once.
l Press the ‘Route Description’ icon.
In order to use this function on S7000 you will need to have entered and calculated a route.
If the ‘Route Description’ icon is greyed out a route has NOT been entered.
From the summary display you can either press ‘Go’ to start navigation, ‘Simulation’ to see the actual route that will be taken,
‘Route Option’ to change the parameters of the route or ‘Guide’ which will list the turn by turn instructions of the journey. The
‘Summary Screen’ will tell you the distance to your destination, estimated time of arrival and the estimated time it will take to
complete your journey.
The summary screen is only displayed for approximately 10 seconds before the unit automatically returns to providing you
with turn-by-turn instructions.
3.15
After a multi-route has been calculated and the journey has commenced you can access the multi-route information again using
this summary function.
To view the information of the multi-route:
l Press the centre of the screen to enter the ‘Navigate to’ menu.
l Press the black arrow once.
l Press the ‘Multi-route Description’ icon.
In order to use this function on S7000 you will need to have entered and calculated a route. If the ‘Route Description’ icon is
greyed out a route has NOT been entered.