Operation Manual

40
Return to contents
5.1
S7000 volume can be adjusted using this function within the ‘Configure’ menu. To adjust the volume:
l Press the centre of the screen to enter the ‘Navigate to’ menu.
l Press ‘Configure’.
l Press the ‘Volume Control’ icon.
l To increase the volume press the icon.
l To decrease the volume press the icon.
l To test the volume before saving, press the icon.
l To reset the volume to the factory default press the icon.
l Press ‘OK’ at the bottom of the screen to save your setting.
5.2
S7000 comes with a choice of voice prompts and alerts in several languages.
Changing the language also changes the language of the menu items as
well on the unit. To use this facility:
l Press the centre of the screen to enter the ‘Navigate to’ menu.
l Press ‘Configure’.
l Press the ‘Change Language’ icon.
l Using the left and right arrows search for the voice you require.
l If you would like to listen to a sample of any voices simply press the ‘Test’
button.
l Press ‘OK’ to save your setting.
5.3
The ‘Setup’ function allows you to customise the visual information provided by the navigation screen. To alter any of these
settings:
l Press the centre of the screen to enter the ‘Navigate to’ menu.
l Press the ‘Configure’ button.
l Press the ‘Setup’ icon where you will see the list of options below.
l Select the option you wish to change on the left.
There are number of different pieces of information that you can have
displayed on the navigation screen at any one time as follows:
5.3.1
This option allows you to select the view of the map that you would like to have displayed. The 3D navigation view is displayed as
the factory default and displays the map, calculated routes, Points Of Interest and safety camera data (if subscribed to) from a 3D
perspective.