Operation Manual

41
Return to contents
This facility customises the map view between
To make your selection, touch the relevant tick box with your finger.
5.3.2
This option allows you to change the information displayed in the
bottom left hand side of the navigation screen between the vehicle
speed and the current time. You can also specify if you want to display
a twelve or twenty-four hour clock and whether to display ‘am’ and ‘pm’.
To make your selection, touch the relevant tick box with your finger.
5.3.3
This option allows you to switch the information on S7000 between
imperial and metric measurement.
To make your selection, touch the relevant tick box with your finger.
5.3.4
This option allows you to display either the estimated time of arrival
(ETA) or the estimated remaining time left for your journey towards the
bottom of the navigation screen.
To make your selection, touch the relevant tick box with your finger.
To save any of the changes press the ‘OK’ button at the bottom of
the display.
If you wish to keep the settings unchanged you can exit the ‘Setup’ menu by pressing the return arrow located in the
bottom right hand corner of the display.
Your new settings will now be saved and will appear on the screen each time you use S7000.
3D 2D North