Operation Manual

5.9

S7000 incorporates pin code security protection so that only users with access to the pin code can use and operate the device. To

activate the security code access the Menu by touching the centre of the screen of S7000 and then press the ‘Conﬁgure’ button.

Next tap the ‘System Security Code’ icon and then select ‘Yes’ to switch the function on. Press the ‘Enter Code’ button and enter the

4 digit code that you would like to use to protect your S7000 and press ‘OK’. Once this setting has been activated you will need to

enter this code each time you power on your S7000 or you will not be able to operate the device.

NB. It is important that you do not lose or forget this code. If you forget this code you will need to return your S7000 so that the

unit can be reset.

5.10

It is also possible to protect the conﬁguration settings using a security pin code. To activate the security code access the Menu by

touching the centre of the screen of S7000 and then press the ‘Conﬁgure’ button. Next tap the ‘Conﬁguration Security Code’ icon

and select ‘Yes’ to switch the function on. Press the ‘Enter Code’ button and enter the 4 digit code that you would like to use to

protect the conﬁguration settings and press ‘OK’. Once this setting has been activated you will need to enter this code each time

you want to amend the conﬁguration settings on your S7000.

NB. It is important that you do not lose or forget this code. If you forget this code you will need to return your S7000 so that the

unit can be reset.

5.11

This function allows you to choose between the alternative colour schemes that are available for the maps used in S7000 system

(several of which are most suitable for use at night). To access this facility:

l Press the centre of the screen to enter the ‘Navigate to’ menu.

l Press the ‘Conﬁgure’ button.

l Press the black arrow

once.

l Press the ‘Change map colour’ icon.

Use the arrows to the left and right hand side of the map display to cycle through the diﬀerent colour schemes. There are nine

colour schemes to choose from.

To save the changes press the ‘OK’ button at the bottom of the display.

If you wish to keep the settings unchanged, you can exit the ‘Change map colour’ menu by pressing the return arrow

located in the bottom right hand corner of the display.

Return to contents