Operation Manual

47
Return to contents
5.12
This function allows you to switch between a ‘Qwerty’ keyboard which is the keyboard selected as the factory default setting or a
keyboard arranged in alphabetical order.
l Press the centre of the screen to enter the ‘Navigate to’ menu.
l Press the ‘Configure’ button.
l Press the black arrow once.
l Press the ‘Qwerty keyboard’ icon.
l Select ‘ Ye s ’ or ‘No’ depending on the keyboard preferred.
To save the changes press the ‘OK’ button at the bottom of the display.
If you wish to keep the settings unchanged, you can exit the ‘Qwerty keyboard’ menu by pressing the return arrow
located in the bottom right hand corner of the display.
5.13
As mentioned earlier in this user manual you have the facility to store, edit and delete on the S7000. (For more
information regarding User Points, please refer to Section 4.3 earlier in the user manual)
Before you can store any user points onto your S7000, you need to activate the button that will allow you to do this.
l Press the centre of the screen to access the ‘Menu’.
l Press .
l Press twice.
l Press the icon.
Press to activate it.
To save the changes press the button at the bottom of the
display.
You will now see the icon displayed on the screen.
If you wish to keep the setting unchanged, you can exit the menu
by pressing located in the bottom right hand corner of the display.