Operation Manual

50
Return to contents
Once the calculation is complete you can either press ‘Go’ to start navigation, ‘Simulation’ to see the actual route that will be
taken, ‘Route Option’ to change the parameters of the route or ‘Guide’ which will list the turn by turn instructions of the journey.
The ‘Summary Screen’ will tell you the distance to your destination, estimated time of arrival and the estimated time it will take
to complete your journey.
Please note: The summary screen is only displayed for approximately 10 seconds before the unit automatically begins to
provide you with turn-by-turn instructions.
6.2.3
If you do not wish to use the alternative routes offered by S7000 and you wish to return to the original calculated route, press the
‘Clear Avoided Road’ button and the original route plotted by S7000 will be restored.
Once the re-calculation of the original route is complete the summary screen is displayed. Once the calculation is complete you
can either press ‘Go’ to start navigation, ‘Simulation’ to see the actual route that will be taken, ‘Route Option’ to change the
parameters of the route or ‘Guide’ which will list the turn by turn instructions of the journey. The ‘Summary Screen’ will tell you
the distance to your destination, estimated time of arrival and the estimated time it will take to complete your journey.
Please Note: If you have already travelled some of the re-calculated route, S7000 may produce a slightly different route from
what was originally plotted.
The summary screen is only displayed for approximately 10 seconds before the unit automatically begins to provide you with
turn-by-turn instructions.
If the ‘Avoid by Road’ and ‘Avoid by Range’ have not been used, this feature is unavailable and the button will be greyed out.
6.3
If you would like to calculate a route to a destination but want to go via a specific
location along the way you can use this function. Simply input the details of your final
destination as usual but press the ‘Route Option’ button in the summary screen and
then select the ‘Navigate Via Location’ button. You are provided with the following
search options:
l Find address by City
l Find address by post code
l Find by POI
l Find by recently used
To find out how to use these options please refer to the applicable sections in this user manual.
Once you have found the address or location you would like to go to via your route,
press the ‘Set’ button. A red tick is now displayed on the ‘Navigate Via Location’
button.
Now press the ‘Done’ button followed by the ‘Calculate’ button.
If you would like to check the route calculated prior to departure press the ‘Guide’
button on the Summary screen which will give you a list of each turn by turn
instruction from the start of your journey to the end.