Operation Manual

66 • UK

Return to contents

6.4 Change Start Position

You can use this function if you would like to calculate a route but from a diﬀerent

location to the one you are currently at. First input your destination address as normal

but when you reach the Summary page, press the ‘Route Option’ button.

Now press the ‘Change Start Position’ icon. You are provided with the following search

options:

 Find address by City

 Find address by post code

 Find by POI

 Find by recently used

To nd out how to use these options please refer to the applicable sections in this user manual.

Once you have found the new starting point, press the ‘Set’ button.

The ‘Change Start Position’ is now highlighted with a red box. Now press the ‘Done’ button followed by the ‘Calculate’ button.

6.5 Summary Screen

The summary screen provides you with the information of your intended route such as

distance to destination and estimated time of arrival for example and gives you the option

of making any changes or viewing the route prior to commencing your journey.

6.5.1 Simulation

Press the ‘Simulation’ button and S7000 will take you through the calculated journey

step by step with full on screen and voice instructions.

Please Note: If at any time you wish to cancel the simulation press the return arrow

located in the bottom right hand corner

of the display.

6.5.2 Route Options

The ‘Route Option’ function can be accessed from this page, this allows you to tailor your journey using options such as ‘Shortest

Time’ or ‘Shortest Distance’ Please refer to the ‘Route Option’ section of this manual for more details.

6.5.3 Guide

If you would like to check the turn by turn instructions of the route calculated prior to departure press the ‘Guide’ button on the

Summary screen.

7.0 Quick Access Menu

A small on-screen Menu can be launched by touching the screen anywhere along the top 10mm of the display. See diagram on the right.

The quick access menu will drop down automatically. If no other button on the drop down box are pressed the drop down box disappears

after approximately three seconds.

 From this Menu you can:

 Zoom closer in, or zoom further out from the map.

 Mute or alter the audio level

 By pressing the

icon you can manipulate the map

 Switch between the 2D, 3D and North views.

 Switch between day and night settings

 Switch oﬀ the speed camera location facility.