Operation Manual

21 • UK
Return to contents
3. Planning a route
There are several ways to plan a route on S7000.
3.1 Find by post code
 Press the centre of the screen to access the ‘Navigate to’ menu.
 Press the ‘Find by post code’ icon.
 If you have the European version of S7000, you will need to select
the ‘Country’ first BEFORE typing the postcode. (If the correct
country is already displayed, go to the next step). Use the arrow
keys on the right of the display to scroll up and down the country
options. Select the country with your finger.
 Press ‘Post code’ and enter the full postcode using the onscreen keyboard.
 Press the ‘OK’ button on the keyboard.
Please Note: The button on the keyboard with no character on it is the ‘Space’ key. A space between the two parts of the
postcode MUST be entered in order for the postcode to be recognised.
If the following message is displayed ‘Please, input correct postcode’,
the postcode has been entered incorrectly. Press OK and retype the
postcode.
 S7000 will display a screen showing the postcode and the street
name.
 If you know the house/property number of your destination, press
the button to enter it .
 Once you have entered the house number press the ‘OK’ button.
NOTE: For Truckmate or Ventura models you can select the vehicle
type before the journey is calculated.
 Alternatively, if you do not have a house or building number, you can navigate to a point where two roads meet instead.
Press the ‘Intersection’ button and select the road .
 Press the ‘Calculate’ button.