Operation Manual

31 • UK
Return to contents
3.10.2 To navigate using a ‘Different Position’
 Press the centre of the screen to enter the ‘Navigate to’ menu.
 Press the black arrow once.
 Press the ‘Find by nearest POI’ icon.
 Select ‘Different Position’
 Press ‘Country’ and select the country where you would like to find the POI. (If the
country is already displayed, go to the next step). Use the arrow keys on the right to
scroll up and down the options.
 Next press ‘City’ and enter the city name using the keyboard displayed.
As you begin to input the city name, S7000 will automatically prompt you with a list
of possible matches. If you can see the name of the destination you are searching for
in the lower window, you can select it easily by pressing that name with your finger. If
you wish to view the list of possible destinations in full, press the down arrow to the
top right hand corner of the display and a list of cities will be displayed then select your
destination by touching on it. Use the arrow keys on the right hand side of the display to
scroll through the list.
 Press ‘Street’ and use the keyboard displayed to type in the street name.
As you begin to input the road or street name, S7000 will automatically prompt you with
a list of possible matches similar to when searching for ‘City’ described above. When you
see the road you require select it by pressing it with your finger.
Once all fields have been completed you can view the new position by pressing ‘Map’ at
the bottom of the screen.
 Press ‘Set’
 Select the maximum radius you wish the unit to search for (the default setting is 30
miles) and then press ‘OK’
 Press ‘Category’ and enter the category type using the keyboard displayed.
If you do not know which category to type, you can press the down arrow to the right
of the lower window and all the category types will be displayed in alphabetical order.
Use the arrows to the right of the display to scroll up and down through the category
options. Once you find the category you are looking for select it with your finger.
A list of POI’s within the specified radius and category will be displayed. Use the arrows to
the right hand side of the screen to scroll up and down through the options. When you
find the POI that you are looking for, select it with your finger.
 To start the journey press ‘Calculate’
 To view the location of the POI, press ‘Map’.
 To change the route parameters press ‘Route Option’ (see Section 6: Route Options
on page 65 for specific instructions).
 To return to the previous page press the return arrow located on the bottom right hand corner of the display.