Operation Manual

Return to contents

Downloading the Enigma™ Camera Database

Please Note: You must register your Syrius Plus before you can perform a download.

Performing a download is simple.

1. Connect the AC Power adapter provided to a mains plug socket

and attach the other end to the Syrius Plus in the socket marked

DC 5V.

2. Power up the Syrius Plus by pressing and holding the power

button for 2 seconds and then connect the computer to the

Internet.

3*. Right click on the symbol located in the bottom right hand corner

of your desktop in the system tray and left click ‘Download

Settings’.

4*. Select the les you wish to download (UK Cameras is selected

by default). Once you have selected the les you wish to

download left click the ‘OK’ button.

5. Connect the USB lead to your computer and plug the other end

of the lead into the Syrius Plus in the socket marked USB on the

underside of the unit.

6. The Syrius Plus software will then start to run automatically and

download the database les that you have selected onto your

unit. The download process is as follows:

l The software will display the serial number of your Syrius Plus

and a green progress bar will start to progress across the

screen.

l The software will then connect to our database server and

then download** the database.

l The Syrius Plus will then save the data received.

l The software will indicate that the download is complete and

will instruct you to disconnect the Syrius Plus from your PC.

Note: The software will shut down automatically after 5

seconds if you do not disconnect your unit as instructed.

*You only need to do these steps if you wish to change the data that is downloaded onto the Syrius Plus. If you want the

download settings to be the same as the previous download ignore these two steps.

**If you have a Firewall on your computer, the Firewall software may inform you that the Syrius Plus Updater software is

trying to access the internet. Please make sure that you grant/allow/permit access to the Syrius Plus Updater program

through the Firewall.

Please read the messages supplied by your Firewall software carefully before choosing your option. If you do not allow

the program to access the internet through the Firewall, the download process will fail. Please note: Windows XP SP2 and

Windows Vista come with a built-in rewall as standard.

Plug the charger into a

240V AC mains socket

Connect the USB lead

to your Syrius Plus

Plug the charger cable

into the socket on the

back of the Syrius Plus