Operation Manual

49
Return to contents
6.5.1
Press the ‘Simulation’ button and your Syrius Plus will take you through the calculated journey step by step with full on
screen and voice instructions.
Please Note: If at any time you wish to cancel the simulation press the return arrow located in the bottom
right hand corner of the display.
6.5.2
The ‘Route Option’ function can be accessed from this page, this allows you to tailor your journey using options such as
‘Shortest Time’ or ‘Shortest Distance’ Please refer to the ‘Route Option’ section of this manual for more details.
6.5.3
If you would like to check the turn by turn instructions of the route calculated prior to departure press the ‘Guide’ button
on the Summary screen.
7.0 Quick Access Menu
A small on-screen Menu can be launched by touching the screen anywhere along the top 10mm of the display. See
diagram on the right.
The quick access menu will drop down automatically. If no other button on the drop down box are pressed the drop down
box disappears after approximately three seconds.
From this Menu you can:
l Zoom closer in, or zoom further out from the map.
l Mute or alter the audio level
l By pressing the icon you can manipulate the map
l Switch between the 2D, 3D and North views.
l Switch between day and night settings
l Switch off the speed camera location facility.
7.1 Volume Setting
Selecting this option opens the Volume menu whereby you can increase or
decrease the audio level of the unit. Press the ‘Volume Control’ icon. To adjust
the volume, use your nger to press either the button to increase the volume
or the button to decrease the volume.
Please note that this new setting is only temporary and if the Syrius is switched off and then back on the audio
level returns to either the factory default or your personalised setting.
If you press the speaker icon
you can turn off the audio on the unit
completely. A symbol is displayed in the top left hand corner of the
display to indicate that the sound has been switched off. If Bluetooth is
activated the symbol is not visible.
To switch the sound back on press the screen near the top of the display
and select the ‘Volume Control’ icon. Press either the speaker icon or
the volume controls to restore audio on the unit.