Replacement Part List
11
30SB, 36SB, 45SB
Snow BEAST
Snow BEAST Snow Blower
Rev Jan 2016
1. Locate the thin cable on the right side (standing from the operator posion) of the snow blower.
2. Aach the cable to the threaded end under the drive control handle. The cable extension may need to be
aached to the boom of the handle.
3. Screw clockwise to secure. Tighten lock nuts when correct tension is achieved.
4. The drive and impeller cables will be at correct tension when the cables are properly aached to the handles
and the cable has a 1 inch deecon to either side when pushed rmly with a nger as shown.
1. Locate the thin cable on the le side of the snow blower.
2. Aach the cable to the threaded end under the impeller control handle.
3. Screw clockwise to secure. Tighten lock nuts when correct tension is achieved.
4. The drive and impeller cables will be at correct tension when the cables are properly aached to the handles and
the cable has a 1 inch deecon to either side when pushed rmly with a nger as shown.
Correct amount of
deecon shown
---