Replacement Part List
16
30SB, 36SB, 45SB
Snow BEAST
Snow BEAST Snow Blower
Rev Jan 2016
The following ps will help ensure proper and long lasng use of your BEAST snow blower. ALWAYS wear prop-
er safety equipment when operang the snow-blower, and make sure you dress appropriately for cold weath-
Figure 1
Before use, always ensure there is nothing lodged in the
auger, or impeller area. Inspect the auger and impeller
for damage from rocks or other debris, and ensure there
is no string, twine, etc stuck on the auger or impeller
shas. Visually inspect for loose hardware or any con-
Inspect the area you will be operang the snow blower
in. Avoid areas with rocks, large branches and limbs, or
other debris that may damage the snow-blower. Only
operate the snow blower on paved ground.
Figure 2
To pro-long the life of the fricon wheel system, do not
parally-engage the drive system, or connually engage
and dis-engage the drive system if the engine begins to
slow under heavy loads. When operang the snow-
blower in dense wet snow, or signicant amounts of
snow, use a slower speed on the transmission.
Figure 3
The Snow Beast uses a “live axle” which means the
wheels on either side of the snow blower turn together.
When turning the snow-blower 180
o
dis-engage the
drive system. Shi to Speed 1. Re-engage the drive
handle and pull on the control handle to shi the weight
distribuon to the outside re. This will assist in turning
the snow blower, and is especially important for the
45SB which uses double res on each side.
Example: If turning le, shi the weight of the
snow blower to the right. If turning right, shi
Figure 4
Set the desired dis-charge direcon and angle before
engaging the auger/impeller. Do not adjust the dis-
charge direcon or angle while throwing snow. The ex-
tra forces may damage the cables.
-
Figure 1
Figure 2
Figure 3
Figure 4