Replacement Part List

26
30SB, 36SB, 45SB
Snow BEAST
Snow BEAST Snow Blower
Rev Jan 2016





1 B00110
Snow blower Wheel and Tire Assembly. Includes lynch pin. Models: 30SB, 30SS,
36SB, 36SS, 45SB, 45SS
2 B01110 Transmission Belt (toothed belt) Models: 30SB, 30SS, 36SB, 36SS, 45SB, 45SS
3 B01310
Plasc Belt Guard for 420cc Snow blower Engine. Models: 30SB, 30SS, 36SB,
36SS, 45SB, 45SS
4 B01910
Shi Rod. Aaches from the shi lever to the fricon wheel pivot bar. Includes
hardware. Models: 30SB, 30SS, 36SB, 36SS, 45SB, 45SS
5 B02010
Augers/Impeller OR Drive Engagement cable for snow blowers. Contains 1 cable
and cable end for auger/impeller or drive engagement. Models: 30SB, 30SS,
36SB, 36SS, 45SB, 45SS
6 B02210
Headlight Assembly (Black bezel, plasc housing, bulb, and wires). Models:
30SB, 30SS, 36SB, 36SS, 45SB, 45SS
7 B02510
Fricon Wheel Assembly with Bearing
(Complete fricon wheel with bearing and fricon rubber pre-installed. Mod-
els: 30SB, 30SS, 36SB, 36SS, 45SB, 45SS
8 B02610
Fricon Wheel Cover Panel with hardware. Models: 30SB, 30SS, 36SB, 36SS,
45SB, 45SS
9 B09011
Upper Control Handle/Control Panel Frame ONLY - GREY. Includes labels, and
rubber grips and hardware to aach to lower control handle. Does not include
control handles, crank handles, or electrical wiring. Models 30SB, 36SB, 45SB
10 B02811
Le Control Handle. Includes rubber grip and hardware. - GREY. Models: 30SB,
36SB, 45SB
11 B02911
Right Control Handle. Includes rubber grip and hardware. - GREY. Models: 30SB,
36SB, 45SB
12 B03411 Handle Rubber Grip for 2010+ BEAST Snow blowers. Models: 30SB, 36SB, 45SB
13 B03511
Chute Direcon Control Handle. Includes crank handle, rubber knob, square
cable receiver, and bearings. Models: 30SB, 30SS, 36SB, 36SS, 45SB, 45SS
14 B03811
Discharge Chute Angle Lever (Le Lever). Includes rubber grip and hardware.
Models: 30SB, 30SS, 36SB, 36SS, 45SB, 45SS
15 B03911
Transmission Speed Shi Lever (Right Lever). Includes rubber grip and mounng
hardware. Models: 30SB, 30SS, 36SB, 36SS, 45SB, 45SS




16 B04411
Control Handle Inter Lock Linkage. Includes rod, tab, 2 springs, and end
connecons. (Linkage rod that runs from the le control handle to the right
control handle). Models: 30SB, 30SS, 36SB, 36SS, 45SB, 45SS
17 B04511
Outer Fricon Wheel Shi Linkage with hardware. Models: 30SB, 30SS, 36SB,
36SS, 45SB, 45SS
18 B04711
Lower Handle Bar Frame - GREY.
(Aaches from the frame to the upper control panel assembly.) Includes hard-
ware to aach to upper control handle and chassis. Models: 30SB, 36SB, 45SB
19 B04911
Transmission Belt Idle Pulley with Bracket. (Includes idle pulley, mounng
bracket, and return spring) Models: 30SB, 30SS, 36SB, 36SS, 45SB, 45SS
20 B05011
Cranksha Pulley Set (Includes auger/impeller double pulley, transmission
toothed pulley, spacer bushing, axle keys and bolt with washer.) Models: 30SB,
30SS, 36SB, 36SS, 45SB, 45SS
21 B05611
Fricon Wheel Shi Linkage Assembly Includes outer fricon wheel shi linkage,
inner fricon wheel shi linkage, and bracket with hardware. Models: 30SB,
30SS, 36SB, 36SS, 45SB, 45SS
22 B09311
Fricon Wheel Aluminum Drive Hub Assembly. Models: 30SB, 30SS, 36SB, 36SS,
45SB, 45SS
23 B09411 Snow blower Wheel lynch pin. Models: 30SB, 30SS, 36SB, 36SS, 45SB, 45SS
24 B09711
Intermediate Axle Sha with bearings, and snap rings. (Fricon wheel rotates
on intermediate sha). Models: 30SB, 30SS, 36SB, 36SS, 45SB, 45SS
25 B02110
Discharge Chute Deector Cable. Includes spring, spring guide and hardware.
Models: 30SB, 30SS, 36SB, 36SS, 45SB, 45SS
26 B01810 Chute Direcon Control Cable. Models: 30SB, 30SS, 36SB, 36SS, 45SB, 45SS
27 B00410
Headlight Switch and Wiring harness. Models: 30SB, 30SS, 36SB, 36SS, 45SB,
45SS
28 E07610
Engine Assembly - 420cc Electric Start (Includes complete ready to run engine
assembly with fuel tank and recoil. Does NOT include cranksha pulleys.)
Models: 36SB, 36SS, 45SB, 45SS
29 B10611 Auger and Impeller Guide Pulley Assembly.