Use and Care Manual

26
30SB, 36SB, 45SB
Snow BEAST
Snow BEAST Snow Blower
Rev Sept 2019
Chassis Assembly Reference
Item #
GXi Part
Number
Description
1 B00110
Snow blower Wheel and Tire Assembly. Includes lynch pin. Models: 30SB, 30SS,
36SB, 36SS, 45SB, 45SS
2 B01110 Transmission Belt (toothed belt) Models: 30SB, 30SS, 36SB, 36SS, 45SB, 45SS
3 B01310
Plastic Belt Guard for 420cc Snow blower Engine. Models: 30SB, 30SS, 36SB,
36SS, 45SB, 45SS
4 B01910
Shift Rod. Attaches from the shift lever to the friction wheel pivot bar. Includes
hardware. Models: 30SB, 30SS, 36SB, 36SS, 45SB, 45SS
5 B02010
Augers/Impeller OR Drive Engagement cable for snow blowers. Contains 1 cable
and cable end for auger/impeller or drive engagement. Models: 30SB, 30SS,
36SB, 36SS, 45SB, 45SS
6 B02210
Headlight Assembly (Black bezel, plastic housing, bulb, and wires). Models:
30SB, 30SS, 36SB, 36SS, 45SB, 45SS
7 B02510
Friction Wheel Assembly with Bearing
(Complete friction wheel with bearing and friction rubber pre-installed. Models:
30SB, 30SS, 36SB, 36SS, 45SB, 45SS
8 B02610
Friction Wheel Cover Panel with hardware. Models: 30SB, 30SS, 36SB, 36SS,
45SB, 45SS
9 B09011
Upper Control Handle/Control Panel Frame ONLY - GREY. Includes labels, and
rubber grips and hardware to attach to lower control handle. Does not include
control handles, crank handles, or electrical wiring. Models 30SB, 36SB, 45SB
10 B02811
Left Control Handle. Includes rubber grip and hardware. - GREY. Models: 30SB,
36SB, 45SB
11 B02911
Right Control Handle. Includes rubber grip and hardware. - GREY. Models: 30SB,
36SB, 45SB
12 B03411 Handle Rubber Grip for 2010+ BEAST Snow blowers. Models: 30SB, 36SB, 45SB
13 B03511
Chute Direction Control Handle. Includes crank handle, rubber knob, square
cable receiver, and bearings. Models: 30SB, 30SS, 36SB, 36SS, 45SB, 45SS
14 B03811
Discharge Chute Angle Lever (Left Lever). Includes rubber grip and hardware.
Models: 30SB, 30SS, 36SB, 36SS, 45SB, 45SS
15 B03911
Transmission Speed Shift Lever (Right Lever). Includes rubber grip and mounting
hardware. Models: 30SB, 30SS, 36SB, 36SS, 45SB, 45SS
Item #
GXi Part
Number
Description
16 B04411
Control Handle Inter Lock Linkage. Includes rod, tab, 2 springs, and end
connections. (Linkage rod that runs from the left control handle to the right
control handle). Models: 30SB, 30SS, 36SB, 36SS, 45SB, 45SS
17 B04511
Outer Friction Wheel Shift Linkage with hardware. Models: 30SB, 30SS, 36SB,
36SS, 45SB, 45SS
18 B04711
Lower Handle Bar Frame - GREY.
(Attaches from the frame to the upper control panel assembly.) Includes hard-
ware to attach to upper control handle and chassis. Models: 30SB, 36SB, 45SB
19 B04911
Transmission Belt Idle Pulley with Bracket. (Includes idle pulley, mounting
bracket, and return spring) Models: 30SB, 30SS, 36SB, 36SS, 45SB, 45SS
20 B05011
Crankshaft Pulley Set (Includes auger/impeller double pulley, transmission
toothed pulley, spacer bushing, axle keys and bolt with washer.) Models: 30SB,
30SS, 36SB, 36SS, 45SB, 45SS
21 B05611
Friction Wheel Shift Linkage Assembly Includes outer friction wheel shift linkage,
inner friction wheel shift linkage, and bracket with hardware. Models: 30SB,
30SS, 36SB, 36SS, 45SB, 45SS
22 B09311
Friction Wheel Aluminum Drive Hub Assembly. Models: 30SB, 30SS, 36SB, 36SS,
45SB, 45SS
23 B09411 Snow blower Wheel lynch pin. Models: 30SB, 30SS, 36SB, 36SS, 45SB, 45SS
24 B09711
Intermediate Axle Shaft with bearings, and snap rings. (Friction wheel rotates on
intermediate shaft). Models: 30SB, 30SS, 36SB, 36SS, 45SB, 45SS
25 B02110
Discharge Chute Deflector Cable. Includes spring, spring guide and hardware.
Models: 30SB, 30SS, 36SB, 36SS, 45SB, 45SS
26 B01810 Chute Direction Control Cable. Models: 30SB, 30SS, 36SB, 36SS, 45SB, 45SS
27 B00410
Headlight Switch and Wiring harness. Models: 30SB, 30SS, 36SB, 36SS, 45SB,
45SS
28 E07610
Engine Assembly - 420cc Electric Start (Includes complete ready to run engine
assembly with fuel tank and recoil. Does NOT include crankshaft pulleys.)
Models: 36SB, 36SS, 45SB, 45SS
29 B10611 Auger and Impeller Guide Pulley Assembly.