Use and Care Manual

9
Lubricating the Electric Snow Shovel
The electric snow shovel does not need lubrication; all
bearings are lubricated at the factory for the life of the product.
Double-insulated Appliances
In a double-insulated appliance, two systems of insulation
are provided instead of grounding. No grounding means is
provided on a double-insulated appliance, nor should a means
for grounding be added to the appliance. Servicing a double-
insulated appliance requires extreme care and knowledge of
the system, and should be done only by the qualied service
personnel at your Snow Joe Service Dealer. Replacement
parts for a double-insulated appliance must be identical to the
parts they replace. A double-insulated appliance is marked
with the words “Double Insulation” or “Double Insulated.” The
symbol
(square within a square) may also be marked on
the appliance.
Storage
Store the product and extension cord indoors, in a cool dry
location, out of reach of children and animals.
Note: Devices for retaining extension cords are commercially
available.
1. Examine the electric snow shovel thoroughly for worn,
loose, or damaged parts. If parts repair or replacement
is necessary, contact an Authorized Service Dealer for
assistance.
2. Examine the extension cord thoroughly for signs of
excess wear or damage. If it is worn or damaged,
replace it.
3. Disconnect the extension cord from the electric snow
shovel before storing.
4. Store the electric snow shovel in a clean, dry, locked-
up place out of the reach of children and cover it to
provide protection.
5. Store the product and extension cord indoors, in a cool
dry location, out of reach of children and animals.
Note: Devices for retaining extension cords are
commercially available.
Service and Support
If your Snow Joe 323E electric snow shovel requires service or
maintenance, please call 1-866-SNOWJOE for assistance.
Model and Serial Numbers
When contacting the company, reordering parts, or arranging
model and serial numbers, which are found on the decal on the
housing. Copy these numbers into the space provided below.
Please record the following numbers from the housing or handle of
your new product:
3 2 3 E
Model #:
Serial #: