Use and Care Manual

Delivery Contents

Unpack the equipment and check that all of the following parts

are present:

• Container lid

• Metal container

• Flexible metal suction hose

• Aluminum suction tube

• Pleated lter (already mounted)

• Wire lter basket (already mounted)

Dispose of the packaging material in a proper manner.

Assembly

WARNING! Disconnect the plug before carrying out

any work on the equipment. Failure to do so can result in

electric shock.

Positioning the Assist Handle

1. Check that the pleated lter and the wire lter basket

are securely mounted in the correct position (Fig. 3).

2. Place the container lid on the metal container and close

it using the seal clips (Fig. 4).

3. Connect the suction hose to the metal container. To do

this, insert the rotatable plastic end piece of the suction

hose (the end with the printed symbol) into the hose

connection and screw it in until the hose is securely

afxed to the canister (bayonet connection). See Fig. 5.

NOTE: When assembling/detaching the suction hose,

hold the black plastic end piece, not the metal suction

hose. Twisting or bending the hose could damage it.

4. Insert the suction tube onto the rigid end piece of the

suction hose (Fig. 6).

Switching ON/OFF

1. Connect the mains plug.

NOTE: The equipment is tted with a safety stop

switch, which allows for operation only when the

pleated lter and wire lter basket are installed

correctly.

To switch the unit on:

Set the On/Off switch (Fig. 7) to position “ –”.

To switch the unit off:

Set the On/Off switch to position “o”.

Fig. 3

Fig. 4

Fig. 5

Fig. 6

Fig. 7