SDS

SAFETY DATA SHEET
Issuing Date 28-Dec-2015
Revision Date 28-Dec-2015
Revision Number 2
_____________________________________________________________________________________________
The supplier identified below generated this SDS using the UL SDS template. UL did not test, certify, or approve the substance described in this SDS, and
all information in this SDS was provided by the supplier or was reproduced from publically available regulatory data sources. UL makes no representations
or warranties regarding the completeness or accuracy of the information in this SDS and disclaims all liability in connection with the use of this information
or the substance described in this SDS. The layout, appearance and format of this SDS is © 2014 UL LLC. All rights reserved.
_____________________________________________________________________________________________
_____________________________________________________________________________________________
Page 1 / 10
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE
COMPANY/UNDERTAKING
Product identifier
Product Name
Snow Joe MELT Enviro-Blend Ice Melter w/ CMA
Other means of identification
Synonyms
None
Recommended use of the chemical and restrictions on use
Recommended Use
Ice Control
Uses advised against
No information available
Details of the supplier of the safety data sheet
Supplier Name
Snow Joe, LLC
Supplier Address
86 Executive Ave
Edison
NJ
08817
US
Supplier Phone Number
Phone:[phone]
Contact Phone[phone]
Supplier Email
[e-mail]
Emergency telephone number
2. HAZARDS IDENTIFICATION
Classification
This chemical is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200).
Acute toxicity - Inhalation (Dusts/Mists)
Category 4