Product Manual

Discharge Chute Assembly

1. Remove the knobs, washers and carriage bolts from the

discharge chute (Fig. 11).

2. Position the chute deector over the discharge chute and

align the holes, placing the washer between the deector

and the chute (Fig. 12).

3. Secure the carriage bolts and knobs. Make sure the knobs

are tightened (Fig. 13).

4. Turn the crank knob clockwise to ensure the discharge

chute and deector are in position.

Operation

NOTE: Before using this machine, make sure that the power

source you will use complies with the specications detailed

in this manual. Before inserting the plug into the socket, verify

that the snow thrower’s auger and rubber plates are rmly

secured with screws, and that the rubber plates are facing the

correct direction. Perform a test run to ensure that the rotor

turns freely.

Fig. 10

Fig. 11

Fig. 12

Fig. 13