Owners Manual User Manual

8 © TrynEx International 2014 F51537 REV-A141205
Operating Instructions
Adjustable Spinner
When the ns are in their center adjustment position, the spread
pattern will be centered (with most materials).
When looking down at the spinner, moving the ns clockwise will
adjust the spread pattern toward the left side of the spreader.
When looking down at the spinner, moving the ns counter-clock-
wise will adjust the spread pattern toward the right side of the
spreader.
Your spreader is equipped with an adjustable spinner to assist in precise material application. The spinner plate gives the operator control of
whether the material spreads toward the right, left, or is centered. Before operating the spreader, spread some material in a clear area where
you can easily observe the spread pattern and how it changes with n adjustment. Use the instructions below as a guide to get the spread
pattern you desire. The position of the ns may need changed when using different materials or spreader settings.