User Manual
© Trynex International 2009 L11598 — 6
Safety
(continued)
Always inspect pins and latches whenever attaching or detaching spreader, and before
traveling.
Never leave material in hopper for long periods of time. Be aware that all ice melters are
hygroscopic and will attract atmospheric moisture and harden up.
Remember, most accidents are preventable and caused by human error.
Exercising of care
and precautions must be observed to prevent the possibility of injury to operator or
others!
Never operate equipment when under the inuence of alcohol, drugs, or medication that
might alter your judgment and/or reaction time.
Before working with the spreader, secure all loose tting clothing and unrestrained hair.
Always wear safety glasses with side shields when servicing spreader. Failure to do this
could result in serious injury to the eyes.