User guide
© Trynex International 2009 L1600 1 — 21
Before attempting any procedure in this book, these safety instructions must be read and understood by all workers who
have any part in the preparation or use of this equipment.
For your safety,warning and information decals have been placed on this product to remind the operator of safety precautions.
If anything happens to mark or destroy the decals, please request new ones from Snowex.
Remember, most accidents are preventable and caused by human error.
Exercising of care and
precautions must be observed to prevent the possibility of injury to operator or others!
Never operate equipment when under the inuence of alcohol, drugs, or medication that might
alter your judgment and/or reaction time.
.riah deniartsernu dna gnihtolc gnittif esool lla eruces ,redaerps eht htiw gnikrow erof
eB
dluoc siht od ot eruliaF .latem tsniaga latem gnikrow nehw sdleihs edis htiw sessalg ytefas raew
syawlA
result in serious injury to the eyes.
Never allow children to operate or climb on equipment.
Never weld or grind on equipment without having a re extinguisher available.
Always check areas to be spread to be sure no hazardous conditions or substances are in the area.
Always inspect unit for defects: broken, worn or bent parts, weakened areas on spreader or mount.
Always shut o vehicle and power source before attempting to attach or detach or service
Model # SR-110 / SR-210
spreader unit. Be sure vehicle/power source is properly braked or chocked.
Always make sure personnel are clear of areas of danger when using equipment.
Always keep hands, feet, and clothing away from power-driven parts.
Remember, it is the owner’s responsibility to communicate information on safe usage and proper
maintenance of all equipment.
Safety