Datasheet

ManualsBrandsSNT Sensortechnik ManualsSensorsUltrasonic Sensor 120mm 1.5m PNP (NO + NC)

SONARANGE UPR-A 04.17 e

This Information corresponds to the current state of knowledge. SNT reserves the right to make technical changes. Do not use these products in any application

where failure of the product could result in personal injury. Liability for consequential damage resulting from the use of SNT products is excluded.

SNT Sensortechnik AG, Hammerstrasse 6, CH-8180 Bülach, Switzerland, Phone +41 44 817 29 22, Fax +41 44 817 10 83, info@sntag.ch 1/6

www.sntag.ch

Ultrasonic distance and proximity sensors

UPR-A Series

Technical data

UPR-A 1500 TOR 24 C(W)AI

UPR-A 1500 TVPA 24 C(W)

Detection range

120...1500

Blind range (no reasonable analogue signal)

0...120

Hysteresis of binary output, axial

Resolution

~0.5

Linearity

%FS

Over all accuracy in whole temperature range

*1)

%FS

Operating frequency

kHz

~180

Status indicator

LED yellow/red

Binary output, short circuit proof, max. 0.1A

PNP NO/NC

Switching speed max.

Time to readiness when power on

1.3

Speed of analogue output

~30

Analogue output: R

min. 10k with V output

max. 400 with mA output

0...10V

4...20mA

Power supply voltage (reversal polarity protection)

VDC

11...30

Ripple of supply voltage

Mean consumption

~45…65

~45

Temperature range

*2)

°C

0...+60

Pressure range

mbar

abs

900...1100

Mass

~65

Protection class

IP67

Housing material

nickel plated brass

Electrical connection

M12 connector 4-pin

Option: for ATEX zones 2+22

Ex tc IIIC T60°C Dc 0°C ≤ Ta ≤ +60°C

Ex nA IIC T6 Gc 0°C ≤ Ta ≤ +60°C

Option: stainless steel housing (incl. connector)

1.4571 (V4A)

*1)

The accuracy can be improved beyond by teaching the sensor only after it has reached its thermally stable state (e.g. after 30 minutes).

*2)

Operation <0°C is partially possible when the sensor membrane is kept free from icing by the self-heating in continuous operation or by external heating.

• Measuring distances from 120mm to 1500mm

• Analogue or binary output

• Teach-In

• Configurable beam size

• To be configured as scanner or retroreflective barrier

• Wide power supply voltage range 11…30VDC

• Very fast analogue output

• Watertight, IP 67, oil resistant, robust

• Measurement independent of material, surface,

colour and size of target

• Work under dust, dirt, fog, light

• Detect transparent and shiny objects

• Option: ATEX 2/22

• Option: stainless steel housing, 1.4571 (V4A)

• Option: chemically resistant housing

• Option: Synchronization and suppression mode

• Swiss made

download data sheet on

your smart phone with

a QR-Code scanner app.

Summary of content (6 pages)

PAGE 1
SONARANGE UPR-A 04.
PAGE 2
SONARANGE UPR-A 04.17 e Versions Analog output 0...10V and 4...20mA Binary output PNP Binary output NPN with synchronization, Analog output 0...10V and 4...20mA with synchronization, binary out PNP with synchronization, binary out NPN ATEX 2/22, analog output 0...10V and 4...20mA ATEX 2/22, binary output PNP ATEX 2/22, binary output NPN Stainless steel, analog output 0...10V and 4...20mA Stainless steel, binary output PNP Stainless steel, binary output NPN Chemical resistant, analog output 0...10V and 4.
PAGE 3
SONARANGE UPR-A 04.17 e Setting the switching points in scanning mode UPR-A 1500 TVPA 24 C(W) In scanning mode the target partially reflects the ultrasound which is then detected by the sensor. The switching points are set by connecting the teach input with either the power supply –UB (0V) or +UB (+24VDC) for 1…5s. The blinking LED shows during teaching if the sensor has detected the object.
PAGE 4
SONARANGE UPR-A 04.17 e 400mm Synchronization ("Y" option) 1500 mm If several sensors are placed close together and scan the same object or if a common background is present, the sensors must be synchronized. For this, the Teach/Sync. leads of all sensors (max. 6 sensors) are interconnected. Important is the order: 1. teach each sensor individually (!) 2. turn off the power 3. interconnect all Teach/Sync. lines 4.
PAGE 5
SONARANGE Dimensions UPR-A 04.
PAGE 6
SONARANGE UPR-A 04.17 e Ultrasonic distance and proximity sensors resistant against chemicals UPR-A CP Series • • • • • based on UPR-A series CP means “Chemical Protection” resistant against most chemicals such as acids and alkalis exposed parts made of PVDF, PTFE, Kalrez ® for level measurement and control of aggressive media Versions Analogue output 0...10V and 4...