User's Manual

Page: 16
Soapy Care Ltd.
5.3 Mounting
5.3.1 Wall types
When installing the system on a wall, Verify the type of wall.
Concrete or stonewall, the installer can use the provided wall plugs for installation of the bracket.
If the wall is drywall, the installer must use wall plugs that will hold more than 16 Kg.
5.3.2 Mounting process
Scheme B: Mounting process
1) Use the leveler to verify the horizontal position of the wall mounting bracket. (See B1 for the )
We suggest using a template for marking holes. The template will help to assure that the height of the unit is
appropriate. (See “
Appendix A”)
2) Drill four holes at the appropriate height. The recommended height of the mounting bottom side is 108 cm
from the floor. Different heights can be used per customer needs.
(See B1 for the )
3) Place the wall mounting bracket on the wall and insert the four wall plugs with screws into the wall.
(See
B1 for the )
4) Use the open key (
size x) to screw the four screws into the wall plugs. (See B1 for the )
5) Place the system on a wall and screw four vertically aligned long screws that are located on the system with
the use of a long screwdriver. Tighten the system to the wall mounting bracket by screwing the screws. (See
B1 for the )
8) Unscrew the horizontal position adjusters out until the ECO-02 unit will be in a horizontal position.
(See B1
for the )