Record Player Model: LPSC-027 Instruction Manual PLEASE READ THIS MANUAL CAREFULLY BEFORE USE AND KEEP IT FOR FUTURE REFERENCE
BEFORE USE 1. Choose a safe location and avoid placing the unit in direct sunlight or near any heat source. 2. Avoid environments subject to vibration, excessive dust, cold or moisture. 3. Due to the risk of electrical shock, do not open the cabinet. Should a foreign object accidentally find its way into the interior of the unit, contact your local dealer. 4. Do not attempt to clean the unit with chemical solvents as this might damage the finishing. A clean, dry cloth is recommended for cleaning. 5.
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. Speakers hidden in the front feet Turntable Platter Slip Mat Lift Lever Turntable Arm Lock Auto Stop Control Switch Speed Selection Switch Turntable Shaft Turntable Arm Indicator Power ON/OFF Control and Volume Knob Phono Stylus Cartridge Removable Dust Cover Hinge RCA Output Jack USB Jack DC IN Jack Function Mode Switch Button PACKAGE INCLUDED: The package includes below main unit and accessories.
GETTING STARTED Fix the dust cover onto the hinges. Firmly and securely insert the DC plug of the adaptor to the DC IN Jack on the back of the turntable. Plug the adapter’s AC plugs into a power outlet. PHONO MODE 1. Press down the Function Mode Switch Button and it is PHONO mode and the indicator will become red color. 2. Raise the dust cover 3. Turn the Power ON/OFF Control and Volume Knob and the indicator will in red color. 4.
then type in 0000. 3. Turn the VOLUME CONTROL KNOB to adjust the volume. Remark: the mobile phone or tablet PC's volume level also impact the overall volume; please adjust that as well to have a satisfying sound HOW TO REPLACE THE NEEDLE To replace the needle, please refer to the instructions below. Removing the needle from the cartridge 1. Place a screwdriver at the tip of the needle headshell and push downwards in the direction shown in sketch “A” 2.
If your computer does not auto run, click on the “Start” menu, select “Run” and choose the CD located on your computer and run “Setup.exe” 3. Run Audacity Program Double-click on the Audacity program and the Audacity interface window will be displayed on your computer screen. 4. Playback Control Toolbar Audacity will display a control toolbar for you to edit and manage your recordings. 5.
. Recording Select the RECORD button to start recording while your record is playing. You will need to position the needle on the record for a few seconds before the track starts, so that you select the RECORD button at the beginning of your track. Start playback on the USB turntable. You will see the waveform of the audio on the screen as it is recording. You will hear the audio coming from the output of your computers soundcard.
. Editing your Recording Audio Levels Select your entire recording by selecting “Edit,” then “Select…” then click “All.” Select the “Effect” menu and choose the desired effect. There are various types of effects which are described further on Audacity’s website. Selecting “Normalize” should be used to have Audacity auto-correct volume on the recording.
Noise Reduction Drag your cursor over a portion of the audio track which contains unwanted noise. We recommend using the beginning or end of a track where there is no music and only noise.
- Select “Effect” and then “Noise Removal” from the drop down menu to bring up the “Noise Removal Window” - Click “Get Noise Profile” and the window will close automatically. - Select the entire track of audio you wish to remove noise from. - Adjust the amount of audio that you would like to filter by moving the slider in the “Noise Removal” window. We recommend using the minimum noise removal for optimum sound. Note: you can preview the audio before removing the noise by clicking on ‘Preview’.
- Click on ‘Remove Noise’.
Before editing, you must make a selection of the recording you would like to cut or copy. This will trim any music from the previous track, or any silence on the record between tracks. - To select the part you wish to cut, copy or paste, use the selection tool. If it is not activated, do so by clicking on it in the toolbar. - Press and hold the left mouse button while you drag the mouse to a marked area. - This area is darker than the surrounding area of the clip.
9. Exporting to MP3 To export your recording to mp3 format, select “Export As” from the “File” menu. You will need to choose which format to export to. Choose “.mp3” as your file extension. When exporting, do not choose your Desktop as the destination folder. You can only choose “My Documents” folder. After export, you can move the files as desired. For additional software information, please refer http://audacity.sourceforge.net for detailed operating instructions.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.