User's Manual
- 10 -
Router Cabling under Driver Seat & Passenger Seat
• Connect 6-pin signal cord 1A (white) and 6-pin signal + power cord 2A (red) of driver seat to
corresponding with the connectors of signal cord 3A, and then fix both connectors with a clamp if
available. And connect other end connectors (white and red) of signal cable 3A to corresponding with
connectors of Control Box as shown below. Repeat for passenger seat.
• Connect FM antenna cable to Control Box 2-pin connector.
• Connect power cable to Control Box 3-pin connector, then to vehicle power.