User's Manual

- 15 -
Remote Control Operations
Installing the Battery
Before attempting to operate your remote control, install the batteries as described below.
1. Turn the remote control face down. Press down on the ridged area of the battery cover and slide it off.
2. Install two “AAA” batteries as shown. Make sure that proper polarity (+ or -) is observed.
3. Slide the cover back until it clicks.
The remote control will operate this device. It is not a universal remote control and will not control other
equipment.
Warning/Caution on using Batteries
• Always ensure that the batteries are inserted with the positive and negative terminals in the correct
direction as shown in the battery compartment.
• Different types of batteries have different characteristics. Do not mix different types.
• Do not mix old and new batteries. Mixing old and new batteries will shorten battery life and/or cause
chemical leaks from the old batteries.
• When batteries fail to function, replace them immediately.
• Keep the batteries out of the reach of children. Should the batteries be swallowed, immediately
consult a doctor. Also, when disposing of used batteries, please comply with governmental regulations
or environmental public institution rules that apply in your country/area.
• Remove the batteries if the remote control is not used for a month or longer.