User's Manual

- 23 -
DVD Basic
To get the most use out of each DVD, make sure you read this section completely.
Regional Coding
Both the DVD player and disc are coded by region. These regional codes must match in order for the
disc to play. If the codes do not match, the disc will not play. The system’s code may be region 1. Other
regional may not be played in this system.
Type of Discs your DVD will Play
DVD-Video: DVD contains video.
CD-DA: CD contains musical or sound content only.
CD-Video: CD contains movie only.
CD-R/RW: A disc that contains audio files (for example, a CD-R with downloaded MP3 files), MPEG,
or JPEG files.
Loading and Playing Discs
Before you load a disc, make sure that it is compatible with the player. Note that the following discs
CAN NOT be used with this player:
Optical disc- CD-1, CD-ROM, and DVD-ROM
Mini disc- CDG (audio only, not graphics)
To Load and Play a Disc
When you press the POWER button the system on and in DVD mode. Put the disc’s printed-side facing
rear of vehicle into the disc compartment about halfway into the slot. The disc will loaded automatically
and begin to play .
(Some discs may start at the root menu, where play must be selected to start movie.)
Depending on the disk and playback location on the disc, the icon may be displayed in the upper-left
corner of the screen indicating that still playback is not possible.