User's Manual

- 36 -
No picture
• Check that the signal source is connected.
• Check that the setting may be in the wrong status. Match your source
selected correctly.
• Contact the service department.
Distorted picture
• Check the disc for fingerprints and clean with a soft cloth, wiping from
center to edge.
• Sometimes a small amount of picture distortion may appear. This is not a
malfunction.
Cannot advance through a
movie
• You cannot advance through the opening credits and warning information
that appears at the beginning of movies because the disc is programmed
to prohibit that action.
No sound or distorted
sound
• Make sure that the DVD player is connected properly, and all cables are
securely inserted into the appropriate jacks.
• If you are using the IR headphones, make sure you turn on the IR power.
• Make sure the FM modulator is on and the proper frequency has been
selected.
• Is volume turned “UP” on headphones?
• Is anything blocking signal between monitor and headphones?
Player does not respond to
all operating commands
during playback
• Operations are not permitted by the disc.
• Refer to the instructions in the disc inlay.
Device feels warm
• When the device is in use for a long period of time, the surface will
heated. This is normal.