Installation & Assembly

audio selection ∙ 23
TV Mode:
This mode is designed for pairing the table with the Bluetooth dongle.
First, power on the table. To select the TV mode, press the “Source”
button until the TV icon on the display screen lights up.
Audio Input Mode:
When you have selected the AUX input, the “AUX In” logo will illuminate.
Connect a 3.5mm audio cable (provided) between your device and
the Sobro Coffee Table. You can now control the playback with your
connected device. The USB ports do not support audio input.
Press Icon Lights Up
Press Icon Lights Up
AUDIO SELECTION
Bluetooth: Default Mode
After powering on the Sobro table, the Bluetooth icon on the display
will automatically light up and ash. On the device you want to
pair with the Sobro (mobile phone, tablet, Smart TV, etc…) begin
Bluetooth pairing mode. Pair with the device called “SOBRO.” When
paired, the Bluetooth icon will illuminate steadily.
Press Icon Lights Up
Specic procedures for Bluetooth
pairing may vary from device to
device. Check the user manual
of your device for specic
instructions about Bluetooth
pairing. In some cases, you may
need to enter a password on your
mobile device to pair.
If so, type in the password 0000.
Only one Bluetooth-enabled
device can be paired with the
Sobro at a time. To connect a new
Bluetooth-enabled device, unpair
the rst one, or press and hold the
“Source” button to disconnect.
NOTE: Please keep the pairing
range within 10 meters.
BLUETOOTH DONGLE
22 ∙ bluetooth dongle
Setup & Assembly
1. Connect the Micro USB plug to the
Micro USB jack on the back of the dongle.
2. Connect the USB end into the power adapter
and then into a wall outlet to power the dongle.
3. Connect either the 3.5mm cable or RCA cable
to the AUX IN jack on the back of the dongle
based on the outputs of your TV or device.
4. Connect either the 3.5 mm or RCA plugs to
the audio output of your TV or device.
5. Press the Power/Bluetooth button once to
start the dongle.
6. To turn off the dongle, press and hold the
Bluetooth button for 5 seconds.
Connect to the Sobro table:
1. Power on the dongle by pressing the
Bluetooth button and to get ready to pair.
2. Wait for 5 seconds and the dongle will
connect to the Sobro table automatically.
3. Put Sobro in TV mode.
4. When connecting, the blue LED indicator
light will pulse.
5. When the Bluetooth connection is
completed, the LED indicator will stop
ashing.
Bluetooth Button AUX IN Jack
Micro USB
Jack
LED Indicator Light
The Bluetooth dongle provided helps connect your non-Bluetooth enabled TV or device to the Sobro table.
If you have a smart TV with Bluetooth built-in, you may not need the Bluetooth dongle to connect the audio from your TV to the Sobro table.
Front Back