Installation & Assembly

MAINTENANCE & CLEANING
Clean the Sobro regularly to avoid dust accumulation. Wipe the surface of
the table with the included microber cloth.
Use a small handheld vacuum or a soft brush to clean any dust. Do not use
abrasive or sharp tools to clean your Sobro.
If you are powering off the table for an extended period of time, clean and
dry the refrigerator drawer and store them in a clean, dry location. Do not
place any parts outdoors.
Before cleaning the Sobro, please make sure to turn off the table and
remove the plug. Do not submerge or douse any part of the appliance with
water or any other liquid. Do not use abrasive or corrosive cleaning agents
to clean the Sobro.
How To Prevent Odor Build-up:
Foods that may expire easily should not be placed in the refrigerator. Store
foods in sealed plastic bags.
Keep the refrigerator clean and dry. Clean the drawer on a regular basis
Auto Shut-off Function:
The Sobro table has a freezing function that will shut the refrigerator
off automatically if the ambient temperature is too low. If the ambient
temperature is lower than 5℉, the refrigerator will not work.
How To Remove Odors:
If your refrigerator begins to develop an odor, clean the refrigerator with
a non-corrosive or non-abrasive cleaning agent. Dry the refrigerator with a
soft cloth and shut the drawer for 24 hours to remove the smell.
In order to avoid generating an odor in the refrigerator, avoid placing foods
that will expire in the refrigerator for a long period of time.
26 ∙ maintenance & cleaning
TROUBLESHOOTING & CUSTOMER SUPPORT
For product support, warranty, and maintenance related questions, please contact StoreBound directly at: 1-800-898-6970 from
7AM - 7PM PST, Monday - Friday, or by email at [e-mail].
REPAIRS: DANGER! Risk of electric shock! The Sobro is an electrical appliance. Do not attempt to repair the appliance yourself under any circumstances.
Contact Customer Support regarding repairs to the device.
ISSUE SOLUTION
troubleshooting & customer support ∙ 27
If the Sobro is placed unsteadily.
The Sobro table is not chilling
ingredients or beverages in the
refrigerator.
The refrigerator temperature
is high.
Odor from refrigerator.
The unit does not turn on.
There is a burning odor during
operation.
If the Sobro is plugged in, I can hear the
compressor but nothing is showing on the screen.
The screen is on, but I cannot select the source.
Can I set the table to standby?
Adjust the placement of the Sobro by adjusting the four legs under the table. Rotate the legs to adjust.
The refrigerator may be too full. Remove some of the beverages or food in the refrigerator.
Ensure the drawer is closed properly.
Adjust the temperature to its lowest setting.
Ensure the back of the table is properly vented.
If the table is still not chilling, call customer service.
Ensure that the refrigerator drawer is always closed tightly.
Do not place hot food in the refrigerator.
Do not overll the refrigerator.
Make sure the Sobro table is properly ventilated.
Unit should be cleaned before using for the rst time. This will clear any odors that may have been trapped during shipment.
Clean unit and refrigerator drawer thoroughly. Any uncovered foods will create a odor.
Remove and clean drawer.
Assure that the power cord is attached properly.
Check to make sure the outlet the table is plugged into has power.
This may occur when you rst turn on the unit as the motor cycles through.
If it continues, unplug the unit and call customer service.
Press the Power/Lock & Unlock Button once and the screen with illuminated. Then press and hold the Power/Lock &
Unlock Button for 3 seconds to unlock the table.
Press and hold the Power/Lock & Unlock Button for 3 seconds. The display will ash “On” and the Bluetooth icon should
now be on. You can now change the source.
Yes. Press the Power/Lock & Unlock Button for 3 seconds and the display will show “Off”. To turn the screen “Off”, press the Power/Lock
& Unlock Button again. To turn the screen back on, press the Power/Lock & Unlock Button again. To turn the table back on, press and
hold the Power/Lock & Unlock Button and hold for 3 seconds.