Installation & Assembly

page title ∙ 17 16 ∙ installing the power cord
Step One
WARNING: Do not attempt to install
the power cord until the legs are
installed.
Have one partner lift the right side* of
the Sobro table off the ground. Rest
the opposing side on a foam insert or
cushion for protection.
Step Four
After installing the legs or moving
the Sobro, you must let the
refrigerator coolant settle for a
minimum of 4 hours before plugging
in the Sobro.
WE REPEAT: Do not plug in
the Sobro Coffee Table until
4 hours have passed.
X 1
Step Two
The power socket is located on the
underside of the Sobro Coffee Table
towards the back right corner.
Locate the socket and unwrap the
power cord before attaching.
Grounding Instructions:
This appliance must be plugged into a grounded socket. The power cord that is supplied with the
appliance contains the appropriate grounding conductor and grounding plug.
The plug must be inserted into a wall outlet that has been grounded in accordance with the existing
local codes and ordinances. The required nominal voltage and frequency are indicated on the rating
label. Consult a qualied electrician for other concerns.
Step Three
Plug in the adaptor end of the
cord to the socket in the indicated
location above.
INSTALLING THE POWER CORD
Front - drawers
Back - mesh
* USE PROPER LIFTING TECHNIQUE
(Refer to: webmd.com/back-pain/proper-lifting-technique) If you have a history of back pain or injury, do not attempt to lift table.
Sobro (Storebound, LLC) will not accept responsibility for any injury that may occur during set up process.