36”x 84”5T-Barn Door Installation Instruction 36” x 84” 5T-Barn Door Assembly Detail A1 Side Stile 1 A2 Side Stile 1 T1 Top Rail 1 T2 Middle Rail 2 T1 C Tempered glass T2 C Tempered glass A1 T3 Middle Rail A2 T3 2 C T4 Bottom Rail Tempered glass 1 T3 C Tempered glass 5 D 3.
Stile Side Views T1 Top rall T2 Middle rall T3 Middle rall T4 Bottom rall Instructions Step-1 Place the Left Side Stile (A1) on a smooth and clean surface with the groove facing to the right. Get Top Rail (T1), Middle Rail (T3), and Bottom Rail (T4), insert their tongues into the grooves of (A1), and align the pre-drilled holes of (A1) and pre-installed anchors of (T1/T3/T4). Get 3.
Step-2 Get Middle Rail (T2), insert Wood Plug (F) into the 4 pre-drilled holes on each T2, and then insert the left end into the inside pre-drilled hole on (A1). The pre-drilled holes' location is as indicated in the instruction. T1 T2 A1 F T3 T2 A1 T3 T2 T4 Step-3 Get Tempered glass (C), slide it along the grooves between T, and make sure to insert it into the groove of (A1). Please wear gloves to prevent cuts on your hands or the glass is too slippery to install.
Step-4 Get Right Side Stile (A2), make the groove side cover the rail tongues and the edge of the slat then get 3.5” Carriage Bolts (D), insert to the holes on the outside of A2, and use Hey Key (G) to fasten bolts (D) to the pre-installed anchors in (T1/T3/T4).
