Use and Care Manual

Measurements
Overall Rail length is 78/”.
A
C
D
B
F
E
The gap between each pre-drilled hole is 16”.
Door height is H.
The height of holes on the wall is H+1/”.
Distance from the bottom of the door to the floor is 3/8”.
Distance from door top side to holes on the wall is 1/”. .
78/”
A
16”
B
1/”
H+1/”
C
F
⁄”
D
1/”
3/”
16” 16” 16”
Instructions
It is very important to determine whether you will be installing a Header Board prior to install-
ing the track.
Due to many overlapping factors such as the location of wall studs (Our rail come with
pre-drilled holes every 16” on center), the weight of a barn door and the various types of trim
used in homes, we recommend using a Header Board in all situations.
Please install a 1” x 4” or 1” x 6” Header Board above the door opening directly into studs.
Header Board must be solid wood and measure at least the full length of the track or longer
H+1/”
* Header Board and
Lag Bolts for installing
Header Board are not
included in kit.
A
A
5
H
E