Inc Scanner User Manual

4. Press the assigned trigger button and scan the code.
For example, try this Code 39 bar code:
When data is read, a beep should sound, and the
imager should turn off. If the SD Scan Card fails to
read data within a few seconds, the imager will turn
off, and you must try again.
If your device enters sleep mode when SocketScan is running,
press the ON button to initialize the scanner and resume
operation.
5. After a successful scan, data should appear in your document. For
example, after you scan the code above into a Pocket Excel spreadsheet,
data should appear in the first cell.
For tips on scanning technique, please refer to Appendix E.
For information about bar code scanning applications, please
email
[e-mail]
14