User Manual

10
Setting up your SoMo 650
NOTE: Make sure your SoMo 650 is fully charged before proceeding.
1. Disable the hold switch (found on the left side of your SoMo 650) by
moving it up to the unlocked position. See “Left” on page 7 for the
location of the hold switch.
2. Turn on your SoMo 650 by pressing the power button on the front (top
right-hand corner). See “Front” on page 6 for the location of the power
button.
3. Follow the onscreen instructions to set up your SoMo 650.
Installing Microsoft ActiveSync on your
desktop/laptop computer
NOTE: This step is not required if your computer is running Windows Vista.
NOTE: Do not connect your SoMo 650 to your desktop/laptop computer until
ActiveSync has been installed.
1. Close any programs running on your computer.
2. Insert the SoMo 650 Companion CD into the computer's CD-ROM drive.
The CD's welcome page will appear.
3. Click the animated forward icon to proceed to the next screen.
4. Follow the instructions to install Microsoft ActiveSync.
5. After installation, the ActiveSync icon will appear on your
computer’s system tray (usually on the lower right-hand
corner of the screen).
NOTE: Refer to the ActiveSync software online Help for information on how to use the
software. If at any time, you would like to restart this setup program, simply re-insert the
CD into the CD-ROM drive.