User Manual

16
Upgrading the Firmware
ADVANCED USERS ONLY!
You can download firmware upgrades from the Socket website
( www.socketmobile.com/support/downloads
).
To upgrade your firmware:
• Format SD card by FAT (FAT16).
• Save the downloaded firmware upgrade to an SD card, then insert it
into your SoMo 650.
• With the SoMo 650 already switched on, hold the right programmable
application button, and while this button is still being pressed, use the
stylus to press and release the reset button on the bottom of the
device.
• Keep the the right programmable application button pressed until you
see “EBOOT”, then wait until after it counts down to zero before
releasing.
• The firmware upgrading process will then begin. Do not press any
buttons while the upgrade is in progress.
• Once the upgrade is complete, the SoMo 650 will reboot normally.