User's Manual
Table Of Contents
- Table of Contents
- 1 | Introduction
- Back
- Front
- 2 | Getting Started
- STEP 1: Install the Battery
- STEP 2: Charge the Battery
- STEP 3: Set up your SoMo 655
- STEP 4: Install Synchronization Software on Host PC
- STEP 5: Connect to Host Computer
- STEP 6: Set Up Your Device Partnership
- Windows 7/Vista
- Windows XP/2000
- Register SoMo 655
- Install Microsoft Windows Mobile Updates
- Set up Enhanced Wi-Fi Companion
- Set up SocketScan 10
- Configure A/B Mode Switch
- Set up Connect!Agent
- Sprite Backup Trial
- MobiScan Rapid Configuration Tool
- Set up Data Capture Triggers
- Set up WAN Connections
- Configure CF/SD slots
- 3 | Using the SoMo 655
- 4 | Wi-Fi Companion
- 5 | Socketscan 10 for CHS Series 7 Barcode Scanners
- 6 | Socketscan Plug-In for Scanners and Readers
- Appendix A
- Appendix B
- Appendix C
- Appendix E
- Appendix F
- Limited Warranty
- Disclaimer
- Limited Software Warranty
- Regulatory Compliance
17
STEP 4: Install Synchronization Software on Host PC
Do not connect your SoMo 655 to your host PC until the synchronization software has been
installed on the PC.
Windows 7/Vista
1. Enable Windows Mobile Device Center which comes installed on your computer. Download the latest
version for free at: http://www.microsoft.com/download/en/details.aspx?id=14
2. Follow the instructions on the webpage to install the software.
Refer to the Microsoft website for information on how to use the software.
Windows XP/2000
ActiveSync version 4.2 or greater is required to connect to Windows Mobile 5.0, and version 4.5 or
greater is required to connect to Windows Mobile 6.
1.
If your host PC runs Windows XP or 2000, install Microsoft ActiveSync which is available free online at:
http://www.microsoft.com/download/en/details.aspx?id=15
2. After installation, the ActiveSync icon will appear on your system tray (lower right corner of the screen).
Refer to the ActiveSync online Help for information on how to use the software.
STEP 5: Connect to Host Computer
OPTION 1: Connect the SoMo to the host computer with the Sync Cable.
NOTE: It is recommended that you also connect the AC adapter.