User's Manual
Table Of Contents
- Table of Contents
- 1 | Introduction
- Back
- Front
- 2 | Getting Started
- STEP 1: Install the Battery
- STEP 2: Charge the Battery
- STEP 3: Set up your SoMo 655
- STEP 4: Install Synchronization Software on Host PC
- STEP 5: Connect to Host Computer
- STEP 6: Set Up Your Device Partnership
- Windows 7/Vista
- Windows XP/2000
- Register SoMo 655
- Install Microsoft Windows Mobile Updates
- Set up Enhanced Wi-Fi Companion
- Set up SocketScan 10
- Configure A/B Mode Switch
- Set up Connect!Agent
- Sprite Backup Trial
- MobiScan Rapid Configuration Tool
- Set up Data Capture Triggers
- Set up WAN Connections
- Configure CF/SD slots
- 3 | Using the SoMo 655
- 4 | Wi-Fi Companion
- 5 | Socketscan 10 for CHS Series 7 Barcode Scanners
- 6 | Socketscan Plug-In for Scanners and Readers
- Appendix A
- Appendix B
- Appendix C
- Appendix E
- Appendix F
- Limited Warranty
- Disclaimer
- Limited Software Warranty
- Regulatory Compliance
34
SoMo 655 Power Plus Battery Friendly® Utility
This utility provides advanced power management and monitoring and is available on SoMo devices running
Windows Mobile 6 Service Pack 6 or later.
With MCU firmware 2.7 or later, the utility provides detailed information on SoMo performance.
To determine your MCU version, tap Start | Settings | System tab | System info | OS Version.
To learn more about the utility, please visit:
http://www.socketmobile.com/support/downloads/handheld-computer/somo-655/?page=Detail
1. In the Today screen, tap on the Battery icon or Power Plug icon. (These icons indicate whether the SoMo is
running on battery power or connected to AC power.)
Battery icon Power Plug icon
Alternatively, tap Start | Settings | System tab | Power Plus.
2. The Power Plus utility will appear, displaying the Battery screen.
Battery charging Battery discharging