User's Manual
Table Of Contents
- Table of Contents
- 1 | Introduction
- Back
- Front
- 2 | Getting Started
- STEP 1: Install the Battery
- STEP 2: Charge the Battery
- STEP 3: Set up your SoMo 655
- STEP 4: Install Synchronization Software on Host PC
- STEP 5: Connect to Host Computer
- STEP 6: Set Up Your Device Partnership
- Windows 7/Vista
- Windows XP/2000
- Register SoMo 655
- Install Microsoft Windows Mobile Updates
- Set up Enhanced Wi-Fi Companion
- Set up SocketScan 10
- Configure A/B Mode Switch
- Set up Connect!Agent
- Sprite Backup Trial
- MobiScan Rapid Configuration Tool
- Set up Data Capture Triggers
- Set up WAN Connections
- Configure CF/SD slots
- 3 | Using the SoMo 655
- 4 | Wi-Fi Companion
- 5 | Socketscan 10 for CHS Series 7 Barcode Scanners
- 6 | Socketscan Plug-In for Scanners and Readers
- Appendix A
- Appendix B
- Appendix C
- Appendix E
- Appendix F
- Limited Warranty
- Disclaimer
- Limited Software Warranty
- Regulatory Compliance
41
3. The Wi-Fi status icon will appear at the top of the screen. The icon varies based on your connection status.
Tap on the icon to view the main screen of Wi-Fi Companion. To view the different versions of the icon,
please refer to the chart on the next page.
Socket Radio Manager Microsoft Wireless Manager
If you tap Enable Flight Mode (Socket Radio Manager) or All (Microsoft Wireless Manager), the
Bluetooth and Wi-Fi radios will both be disabled. The manager will remember which wireless
radio(s) were running, so when you later tap Disable Flight Mode or All, the same one(s) will turn
on again.