- Socket Cordless Hand Scanner User's Guide 7

STEP 2: Charge the Scanner

Use the included AC adapter to charge the Cordless Hand Scanner. The

scanner’s NiMH batteries must be charged for at least 4 hours before the

first use. The Battery Status LED will emit a solid red light while charging,

and turn off when the batteries are fully charged.

WARNING: Do not attempt to charge alkaline batteries —

this may cause alkaline batteries to leak and damage the

CHS.

The red Battery Status LED will not function properly if

standard AAA alkaline batteries are being used.

STEP 3: Uninstall Other Scanning Software

Delete any bar code scanning software already on your computer.

1. Make sure the bar code scanning software is closed.

2. Click Start | Control Panel | Add or Remove Programs.

3. Select the bar code scanning software and click Remove.

4. Follow the instructions on your screen to remove the software.