User's Manual
Table Of Contents
- Copyright Notice
- _
- 1 | Introduction
- Socket Go Wi-Fi!
- Socket Wi-Fi Companion
- System Requirements
- Product Registration
- Useful Links
- 2 | Software Installation
- _
- 3 | Open or WEP-Enabled Networks
- 4 | WPA or 802.1x Networks
- 5 | Wi-Fi Companion
- Appendix A Specifications
- Appendix B Safety and Usage Tips
- Appendix C Network Information
- _
- _
- Appendix D Troubleshooting
- _
- _
- Appendix E Technical Support
- _
10
6. The InstallShield Wizard will begin. Follow the wizard to install the
software.
7. If you plan to use Socket Go Wi-Fi!
, after installing the card drivers,
install Wi-Fi Companion. Return to the CD contents and click on
WIFISoftwareSetup.exe. Follow the wizard to install the software.
8. After software installation, disconnect the Pocket PC from the host PC.
9. Soft reset the Pocket PC by pressing the reset button.
IMPORTANT! If you installed Socket Wi-Fi Companion on a
Pocket PC with built-in WLAN, you must register the
software. Otherwise, the software will expire in three days.
See the instructions on the next page.
No software registration is required for Socket Go Wi-Fi!