- Socket Cordless Hand Scanner User's Guide

STEP 5: TURN ON THE CHS
Press and hold the small power button for 3 seconds, until
the LED turns blue and the scanner beeps.
The LED should blink blue once every second to show that the
Bluetooth radio is on but not connected.
Time after turning on scanner Bluetooth mode
0-5 minutes Discoverable and connectable
5-20 minutes Connectable
20 minutes Scanner automatically powers off
STEP 6: CONNECT DEVICE TO CHS
1. Tap on the SocketScan icon at the bottom of the screen. In
the menu, tap Connect CS.
If Connect CS does not appear, tap Settings in the menu, tap
on the CS tab, and enable cordless scanner support.
2. Connect!Agent will automatically turn on the Bluetooth radio
and begin to search for and connect to the CHS.
- If this is your first time connecting to a CHS from this
device, Connect!Agent will search for any CHS in range.
CHAPTER 3: SETUP FOR WINDOWS MOBILE 21