User's Manual
Table Of Contents
- Copyright Notice
- Table of Contents
- 1 | Introduction
- 2 | Setup for Windows Mobile
- 3 | Setup for Palm OS
- 4 | Setup for Windows 98SE/Me/2000/XP
- 5 | Setup for Windows XP Tablet Edition
- 6 | Setup for Mac OS X
- Appendix A Specifications
- Appendix B Network Information
- Appendix C Manual Dial-up Connection Setup
- Appendix D Advanced Software Installation
- Appendix E Faxing
- Appendix F Technical Support
- Limited Warranty
- Regulatory Compliance
STEP 4: Complete the Connection Setup Wizard
If you did not install modem software, refer to Appendix C for manual setup instructions.
1. If the Pocket PC is connected to the host PC, remove it from the cable/cradle.
2. Tap Start | Settings | Connections tab. Tap on the Connection Setup icon.
3. Follow the Connection Setup Wizard to create a dial-up connection. Read
the information in the welcome screen and tap Next.
4. Select Bluetooth 56K Modem Connection and tap Next.
5. Enter a name for the Bluetooth connection, or accept the default. Tap Next.
14