User's Manual
Table Of Contents
- Copyright Notice
- Table of Contents
- 1 | Introduction
- 2 | Setup for Windows Mobile
- 3 | Setup for Palm OS
- 4 | Setup for Windows 98SE/Me/2000/XP
- 5 | Setup for Windows XP Tablet Edition
- 6 | Setup for Mac OS X
- Appendix A Specifications
- Appendix B Network Information
- Appendix C Manual Dial-up Connection Setup
- Appendix D Advanced Software Installation
- Appendix E Faxing
- Appendix F Technical Support
- Limited Warranty
- Regulatory Compliance
5. After the Bluetooth connection is established, the Bluetooth Status LED
will begin blinking blue. Dialing will begin. The modem will make
dialing sounds.
6. When the modem connects to your ISP or office network, the Modem
Status LED will turn on (green), blinking during data transfer. Also, the
“X” will disappear from the Connection icon at the top of your screen.
Now you are ready to use your email or Internet application.
METHOD 3: Use your Pocket PC’s Built-in Bluetooth software
The Bluetooth software built into some Pocket PCs allows you to start
dialing into your ISP after establishing a Bluetooth connection to the Socket
Cordless 56K Modem. Refer to your Pocket PC manual for instructions.
Ending a Data Call
Tap on the connection icon (two arrows). In the bubble, tap Disconnect.
CHAPTER 2: SETUP FOR WINDOWS MOBILE 21